Single Phase Energy Meter Calibration Equipment

Single Phase Energy Meter Calibration Equipment

Single-Phase Energy Meter Test Bench -- LS6103 The test bench accuracy class: 0.1/0.2 class Accuracy class: 0.05 /0.1 MSVT(multi secondary voltage transformer) class: 0.01/0.02 Secondary voltage: 180-300V Secondary VA rating: 15VA per winding Insulation secondary to secondary: 500V, 50Hz, 60...

Product Details

Single-Phase Energy Meter Test Bench -- LS6103


The test bench accuracy class: 0.1/0.2 class 

Accuracy class: 0.05 /0.1 

MSVT(multi secondary voltage transformer) class: 0.01/0.02 

Secondary voltage: 180-300V 

Secondary VA rating: 15VA per winding 

Insulation secondary to secondary: 500V, 50Hz, 60 seconds 

Secondary to secondary ratio accuracy less than: ± 0.01% 

Secondary to secondary phase angle accuracy less than ± 1 minute 

Number of secondary output: 8~60channel 

 

Voltage amplifier: 

Output voltage range: 0-275/300V; 

Output maximum power: 800VA 

Resolution: 0.01%; 

Stability: Better than 0.05%/3 min (time base 5S); 

Distortion factor: < 0.5% at linear load; 

Frequency range: 45Hz~65Hz; 

Power efficiency: More than 85%; 

Ambient temperature: 10C~50C 

Electronic overload and short-circuit protection. 

 

Current amplifier: 

Output current: Range: 1mA~120A (option for 1mA~200A); 

Output maximum power: 1500VA 

Resolution: 0.01%; 

Stability: Better than 0.05%/3 min (time base 5S); 

Distortion factor: < 0.5% at linear load; 

Frequency range: 45Hz~65Hz; 

Power efficiency: Greater than 85%; 

Ambient temperature: 10C~50C 

Electronic Overload Protection and security for opening current circuit. 

 

Phase Angle: 0° ~360° , resolution of phase angle setting: 0.1° ; 

Output frequency range: 45Hz~65Hz; Resolution: 0.01Hz 

Output stability of power: <0.05% (180S) 

Numbers of calibrated energy meter: 24 (6/12/24/32/40/48 on requested)

Input power: 120/220/240V ± 15%, 50/60Hz; Power consumption: Max. 2500VA

00001. 

Type of bench

Meters

Number of rack

Number of row

Size of rack

Integration

6
12
24
32
40
48

1
1
1
2
2
2

Single
Double
Double
Double
Double
Double

1600× 800× 1600 mm
1600× 800× 1920 mm
2200× 800× 1920 mm
1800× 800× 1920 mm
2000× 800× 1920 mm
2200× 800× 1920 mm

Fission

24
32
40
48

1
2
2
2

Double
Double
Double
Double

2200× 700× 1920 mm
1800× 700× 1920 mm
2000× 700× 1920 mm
2200× 700× 1920 mm


Size of Console: 600× 800× 1920 mm

 

1)The bench accords with the standard of "IEC 60736: 1982 testing equipment for electrical energy meters", "IEC 62053" 
2)The bench can be used to test both single/three phase active energy meter and reactive energy meter (up to 0.2 Class), it is also suitable for four quadrant energy meter testing. 
3)The bench can do warm up test, starting test, no load test(creep test), error test(accuracy test), dial test, tests of the influence quantities(reverse phase, voltage unbalance, harmonic wave and so on) and test of repeatability of the measurements. 
4)The bench is using the PWM to amplify voltage/current output, the high efficiency at >85%, and lower the heat. The PWM can check the malfunction checking, preset, alarm, and protection 
5)The signal source is using the newest digital controlled sine wave technology for frequency, amplitude and phase adjust. The signal source can repeatedly add 2-21 harmonics on the first sine wave, or cause sub-harmonic wave and odd sub-harmonic wave.
6)The bench is using the HY 5303C-22 reference standard energy meter with comparison technology to offer the accuracy of energy meters. 
7)The bench is using the error processor system to calculate the error of each energy meter by the sub-error system, which can be connected by the internal RS485. 
8)The same specification but different constant energy meter can be tested at one time. 
9)The test bench can be installed scanning head, it can offer 3 ranges adjustment. It is also can be accepted the signal for both round-style energy meter and digital LED energy meter. 
10)The test bench has the auto-search black marker function which can precisely locate the black marker during the no load test and starting test. 
11)The bench can choose to operate by keyboard or PC which is very convenient. The working status of bench can be seen very clear and easy operation. 
12)The bench is using the testing software complied with WINDOWS98/2000/XP which can auto-testing different energy meters. 
13)The software can realize the data from energy meter for statistics, search and management. 
14)The energy meter hanging rack is made by Aluminum compound. The whole device configuration is a reasonable design and nice outfit 


Company information:

Hangzhou LAISON is well-connected to numerous international manufacturers who supply the best products required by high-end industrial, mechanical and engineering companies.

 

FAQ

Q:Why choose you?

A:We have professional team of worers,service and inspection,and we have our own factory. 

Q:Can I get samples?

A:Of course,we provide the small size sample free. 

Q:Where is your factory located?How can I visit there?

A:Hangzhou LAISON technology Co. Ltd. is located in Hangzhou city,Zhejiang province.All our clients,from home or abroad,you are most welcome to visit us! 

Q:How many colors of body are avaliable?

A:We have own spraying equipment,so we can do custom colors as your special request.So any Prantone color is avaliable.You just need to tell me your favorite Pantone color.

Q:Do you offer customized packing?

A:Yes!All of our products can be packed as your requirement.


Hot Tags

Hot Tags: single phase energy meter calibration equipment, China, Europe, America, Africa, manufacturer, supplier
Related Products

Inquiry